Publikationen des Sonderforschungsbereichs 1153

Biester, K.; Budde, L.; Barroi, A.; Lammers, M.; Hermsdorf, J.; Overmeyer, L. (2022): Investigation of deposition welding in vertical and horizontal position with a coaxial laser wire welding head,  The International Journal of Advanced Manufacturing Technology
DOI: 10.1007/s00170-022-09013-6

Budde, L.; Biester, K.; Merkel, P.; Lammers, M.; Kriwall, M.; Hermsdorf, J.; Stonis, M.; Behrens, B.-A.; Overmeyer, L. (2022): Investigation of the material combination 20MnCr5 and X45CrSi9-3 in the tailored forming of shafts with bearing seats,  Production Engineering
DOI: 10.1007/s11740-022-01119-w

Budde, L.; Prasanthan, V.; Merkel, P.; Kruse, J.; Faqiri, M. Y.; Lammers, M.; Kriwall, M.; Hermsdorf, J.; Stonis, M.; Hassel, T.; Breidenstein, B.; Behrens, B.-A.; Denkena, B.; Overmeyer, L. (2022): Material dependent surface and subsurface properties of hybrid components,  Prod. Eng. Res. Devel. (2022)
DOI: https://doi.org/10.1007/s11740-022-01128-9

Budde, Laura; Biester, Kai; Huse, Michael; Lammers, Marius; Hermsdorf, Jörg; Overmeyer, Ludger (2022): Empirical Model for the Description of Weld Seam Geometry in Coaxial Laser Hot Wire Deposition Welding Processes with Different Steel Wires,  Lasers in Manufacturing and Materials Processing
DOI: 10.1007/s40516-022-00170-w

Budde, Laura; Prasanthan, Vannila; Kruse, Jens; Faqiri, Mohamad Yusuf; Lammers, Marius; Hermsdorf, Jörg; Stonis, Malte; Hassel, Thomas; Breidenstein, Bernd; Behrens, Bernd-Arno; Denkena, Berend; Overmeyer, Ludger (2022): Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid components,  The International Journal of Advanced Manufacturing Technology 119(1-2)
DOI: 10.1007/s00170-021-08066-3

C. Nowroth, T. Gu, J. Grajczak, S. Nothdurft, J. Twiefel, J. Hermsdorf, S. Kaierle, J. Wallaschek (2022): Deep Learning-Based Weld Contour and Defect Detection from Micrographs of Laser Beam Welded Semi-Finished Products,  Applied Sciences
DOI: https://doi.org/10.3390/app12094645

Thürer, S. E.; Peters, K.; Heidenblut, T.; Heimes, N.; Peddinghaus, J.;Nürnberger, F., Behrens, B.-A.; Maier, H. J.; Klose, C. (2022): Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished Products,  Materials (15) 1692
DOI: https://doi.org/10.3390/ma15051692

Behrens, Bernd-Arno;Maier, Hans-Jürgen; Poll, Gerhard; Ludger,Overmeyer; Wester, Hendrik; Uhe, Johanna; Hassel, Thomas; Pape,Florian; Lammers, Marius; Hermsdorf, Joerg; Kaierle, Stefan; Budde, Laura; Saure, Felix; Mildebrath, Maximilian; Coors, Timm; Faqiri, Mohamad Yusuf; Büdenbender, Christoph (2021): Influence of degree of deformation in welding pore reduction in high-carbon steels,  Production Engineering 15, 161-168
DOI: https://doi.org/10.1007/s11740-020-01009-z

Böhm, C.; Hudobivnik, B.; Aldakheel, F.; Wriggers, P. (2021): Modeling of Single-Slip Finite Strain Crystal Plasticity via the Virtual Element Method,  Proceedings in Applied Mathematics and Mechanics
DOI: 10.1002/pamm.202000205

Böhm, C.; Hudobivnik, B.; Marino, M.; Wriggers, P. (2021): Electro-magneto-mechanically response of polycrystalline materials: Computational homgenization via the Virtual Element Method,  Computer Methods in Applied Mechanics and Engineering
DOI: 10.1016/j.cma.2021.113775

Böhm, C.; Hudobivnik, B.; Marino, M.; Wriggers, P. (2021): The Virtual Element Method for the numerical homogenization of electro-mechanical responses,  Proceedings in Applied Mathematics and Mechanics
DOI: 10.1002/pamm.202000106

Denkena B.; Behrens B-A.; Bergmann B.; Stonis, M.; Kruse, J.; Witt M. (2021): Potential of process information transfer along the process chain of hybrid components for process monitoring of the cutting process,  Production Engineering 2021, 15, S.199-209
DOI: 10.1007/s11740-021-01023-9

Denkena B.; Bergmann B.; Witt M. (2021): Feeling machine for process monitoring of components with stock allowance,  Machines 2021, 9, 53
DOI: 10.3390/machines9030053

Denkena, B.; Breidenstein, B.; Maiß, O.; Krödel, A.; Prasanthan, V. (2021): Hochdynamisches Festwalzwerkzeug - Neue Möglichkeiten zur innovativen Oberflächenbehandlung von Funktionsbauteilen,  WT WERKSTATTSTECHNIK BD. 111 (2021) NR. 11-12
DOI: 0.37544/1436–4980–2021–11–12–82

Fuhg, J.N.; Böhm, C.; Bouklas, N.; Fau, A.; Wriggers, P.; Marino, M. (2021): Model-data-driven constitutive responses: Application to a multiscale computational framework,  International Journal of Engineering Science
DOI: 10.1016/j.ijengsci.2021.103522

Gerstein, G.; Kahra, C.; Golovko, O.; Schäfke, F.; Klose, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2021): Hot forming of shape memory alloys in steel shells,  Prod. Eng. Res. Devel. 481–482, 2021 (3), 266.
DOI: 10.1007/s11740-021-01024-8

Ince, CV.; Chugreeva, A.; Böhm, C.; Aldakheel, F.; Uhe, J.; Wriggers, P.; Behrens, B.-A.; Raatz, A. (2021): A design concept of active cooling for tailored forming workpieces during induction heating,  Prod. Eng. Res. Devel. 15, 177–186 (2021)
DOI: 10.1007/s11740-021-01027-5

J. Grajczak, C. Nowroth, T. Coors, J. Twiefel, J. Wallaschek, F. Saure, F. Pape, G. Poll, S. Nothdurft, J. Hermsdorf, V. Wesling, S. Kaierle (2021): Influence of process-related heat accumulation of laser beam welded 1.7035 round bars on weld pool shape and weld defects,  Journal of Laser Applications
DOI: https://doi.org/10.2351/7.0000478

Kahra, C.; Nürnberger, F.; Maier, H. J.; Herbst, S. (2021): Heat Transfers Coefficients of Directly and Indirectly Cooled Component Areas during Air-Water Spray Cooling,  HTM 76, 2021 (1), 64-75
DOI: 10.1515/htm-2020-0005

Ohrdes, H.; Nothdurft, S.; Nowroth, C.; Grajczak, J.; Twiefel, J.; Hermsdorf, J.; Kaierle, S.; Wallaschek, J. (2021): Influence of the ultrasonic vibration amplitude on the melt pool dynamics and the weld shape of laser beam welded EN AW-6082 utilizing a new excitation system for laser beam welding,  Prod. Eng. Res. Devel.
DOI: 10.1007/s11740-020-01008-0

Thürer, S.E.; Chugreeva, A.; Heimes, N.; Uhe, J.; Behrens, B.-A.; Maier, H.J.; Klose, C. (2021): Process chain for the manufacture of hybrid bearing bushings,  Prod. Eng. Res. Devel. 15, 137–150 (2021)
DOI: 10.1007/s11740-021-01028-4

Barienti, K.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Ion Beam Processing for Sample Preparation of Hybrid Materials with Strongly Differing Mechanical Properties,  Metallogr. Microstruct. Anal. 9, 2020 (1), 54-60
DOI: 10.1007/s13632-019-00605-5

Beermann, R.; Quentin, L.; Kästner, M.; Reithmeier, E. (2020): Calibration routine for a telecentric stereo vision system considering affine mirror ambiguity,  Optical Engineering
DOI: https://doi.org/10.1117/1.OE.59.5.054104

Behrens, B.-A.; Chugreeva, A.; Diefenbach, J.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Microstructural Evolution and Mechanical Properties of Hybrid Bevel Gears Manufactured by Tailored Forming,  Metals 10, 2020 (10), 1365
DOI: 10.3390/met10101365

Behrens, B.-A.; Duran, D.; Matthias, T.; Ross, I. (2020): Enhancement of the interface of friction welded steel aluminium joints,  Production Engineering, Springer Verlag,
DOI: https://doi.org/10.1007/s11740-020-00994-5

Behrens, B.-A.; Maier, H.J.; Klose, C.; Wester, H.; Thürer, S.E.; Heimes, N.; Uhe, J.; (2020): Characterization and Modeling of Intermetallic Phase Formation during the Joining of Aluminum and Steel in Analogy to Co-Extrusion,  Metals 2020, 10(12), 1582
DOI: https://doi.org/10.3390/met10121582

Behrens, B.-A.; Maier, H.J.; Poll, G.; Wriggers, P.; Aldakheel, F.; Klose, C.; Nürnberger, F.; Pape, F.; Böhm, C.; Chugreeva, A.; Coors, T.; Duran, D.; Thürer, S.E.; Herbst, S.; Hwang, J.-I.; Matthias, T.; Heimes, N.; Uhe, J. (2020): Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing,  Prod. Eng. Res. Devel. 14, 569–581 (2020)
DOI: 10.1007/s11740-020-00992-7

Behrens, B.-A.; Uhe, J.; Petersen, T.; Nürnberger, F.; Kahra, C.; Ross, I.; Laeger, R. (2020): Contact Geometry Modification of Friction-Welded Semi-Finished Products to Improve the Bonding of Hybrid Components,  Metals Special Issue, Springer Verlag 2020
DOI: https://doi.org/10.3390/met11010115

Behrens, Bernd-Arno; Uhe, Johanna; Wester, Hendrik; Matthias, Tim; Büdenbender, Christoph (2020): FE-based Layer Design of Deposition-Welded Semi-finished Parts for the Production of Hybrid Bevel,  Procedia Manufacturing 47, 309-314
DOI: 10.1016/j.promfg.2020.04.235

Berend Denkena, B., Bergmann, B.,Witt, M. (2020): Feeling Machine for Process Monitoring of Turning Hybrid Solid Components,  Metals 2020, 10(7), 930
DOI: 10.3390/met10070930

Bergmann B., Witt M. (2020): Feeling machine for material-specific machining,  CIRP Annals

Breidenstein, Bernd; Denkena, Berend; Krödel, Alexander; Prasanthan, Vannila; Poll, Gerhard; Pape, Florian; Coors, Timm (2020): Production-Related Surface and Subsurface Properties and Fatigue Life of Hybrid Roller Bearing Components,  Metals 2020, 10(10), 1339
DOI: https://doi.org/10.3390/met10101339

Breidenstein, Bernd; Denkena, Berend; Meyer, Kolja; Prasanthan, Vannila (2020): Influence of subsurface properties on the application behavior of hybrid components,  Procedia CIRP 87 (2020) 302–308
DOI: 10.1016/j.procir.2020.02.116

Brockmöller, Tim; Siqueira, Renan; Gembarski, Paul Christoph; Mozgova, Iryna; Lachmayer, Roland (2020): Computer-Aided Engineering Environment for Designing Tailored Forming Components,  Metals 2020 10(12)
DOI: 10.3390/met10121589

Coors, T.; Mildebrath, M.; Büdenbender, C.; Saure, F.; Faqiri, M. Y.; Kahra, C.; Prasanthan, V.; Chugreeva, A.; Matthias, T.; Budde, L.; Pape, F.; Nürnberger, F.; Hassel, T.; Hermsdorf, J.; Overmeyer, L.; Breidenstein, B.; Denkena, B.; Behrens, B.-A.; Maier, H. J.; Poll, G. (2020): Investigations on Tailored Forming of AISI 52100 as Rolling Bearing Raceway,  Metals 10, 2020 (10), 1363
DOI: 10.3390/met10101363

Coors, T.; Pape, F.; Kruse, J.; Blohm, T.; Beermann, R.; Quentin, L.; Herbst, S.; Langner, J.; Stonis, M.; Kästner, M.; Reithmeier, E.; Nürnberger, F.; Poll, G. (2020): Simulation assisted process chain design for themanufacturing of bulk hybrid shafts with tailored properties,  The International Journal of Advanced Manufacturing Technology 108, 2409-2417
DOI: https://doi.org/10.1007/s00170-020-05532-2

Denkena, B.; Bergmann, B.; Reimer, S.; Schmidt, A.; Stiehl, T.; Witt, M. (2020): KI gestützte Prozessüberwachung in der Zerspanung,  ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Band 115, Ausgabe 5, Mai 2020, S.295-298
DOI: 10.3139/104.112282

Denkena, B.; Breidenstein, B.; Krödel, A.; Prasanthan, V. (2020): Chip formation in machining hybrid components of SAE1020 and SAE5140,  Production Engineering (2021) 15:187–197
DOI: https://doi.org/10.1007/s11740-020-00993-6

Grajczak, J.; Nowroth, C.; Nothdurft, S.; Hermsdorf, J.; Twiefel, J.; Wallaschek, J.; Kaierle, S. (2020): Influence of Ultrasound on Pore and Crack Formation in Laser Beam Welding of Nickel-Base Alloy Round Bars,  Metals 2020, 10(10), 1299; Special Issue on Hybrid Bulk Metal Components
DOI: 10.3390/met10101299

Kruse, J.; Mildebrath, M.; Budde, L.; Coors, T.; Faqiri, M.Y.; Barroi, A.; Stonis, M.; Hassel, T.; Pape, F.; Lammers, M.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L.; Poll, G. (2020): Numerical Simulation and Experimental Validation of the Cladding Material Distribution of Hybrid Semi-Finished Products Produced by Deposition Welding and Cross-Wedge Rolling,  Metals 2020, 10, 1336
DOI: 10.3390/met10101336

Quentin, L.; Beermann, R.; Kästner, M.; Reithmeier, E. (2020): Development of a reconstruction quality metric for optical threedimensional measurement systems in use for hot-state measurement object,  Optical Engineering
DOI: https://doi.org/10.1117/1.OE.59.6.064103

Quentin, L.; Reinke, C.; Beermann, R.; Kästner, M.; Reithmeier, E. (2020): Design, Setup, and Evaluation of a Compensation System for the Light Deflection Effect Occurring When Measuring Wrought-Hot Objects Using Optical Triangulation Methods,  metals
DOI: doi:10.3390/met10070908

Thürer, S. E.; Peddinghaus, J.; Heimes, N.; Caner Bayram, F.; Bal, B.; Uhe, J.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2020): Lateral Angular Co-Extrusion: Geometrical and Mechanical Properties of Compound Profiles,  Metals 10, 2020, 1162
DOI: 10.3390/met10091162

Denkena, Berend; Dittrich, Marc-André; Stamm, Siebo Claas; Prasanthan, Vannila (2019): Knowledge-based process planning for economical re-scheduling in production control,  Procedia CIRP 81, S. 980-985
DOI: 10.1016/j.procir.2019.03.238

Nothdurft, S.; Ohrdes, H.; S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L.; Kaierle, S. (2019): Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloy,  Journal of Laser Applications, 31, 2 Weitere Informationen

Siqueira, Renan; Bibani, Mehdi; Duran, Deniz; Mozgova, Iryna; Lachmayer, Roland; Behrens, Bernd-Arno (2019): An adapted case-based reasoning system for design andmanufacturing of tailored forming multi-material components,  International Journal on Interactive Design and Manufacturing (IJIDeM) 13, S. 1175-1184
DOI: 10.1007/s12008-019-00566-7

Beermann, R.; Quentin, L.; Reithmeier, E.; Kästner, M. (2018): Fringe projection system for high-temperature workpieces–design, calibration, and measurement,  Appl. Opt. 57 (15) Seitenzahl: pp. 4075-4089
DOI: 10.1364/AO.57.004075

Beermann, R.; Quentin, L.; Stein, G.; Reithmeier, E.; Kästner, M. (2018): Full simulation model for laser triangulation measurement in an inhomogeneous refractive index field,  Optical Engineering 57 (11) Seitenzahl: pp. (114107-)1 -(114107-)13
DOI: 10.1117/1.OE.57.11.114107

Behrens, B.-A.; Chugreev, A.; Matthias, T. (2018): Characterisation of the joining zone of serially arranged hybrid semi-finished components,  AIP Conference Proceedings 1960, 040002 (2018)
DOI: 10.1063/1.5034856

Behrens, B.-A.; Chugreev, A.; Matthias, T. (2018): Hybride Lagerbuchsen aus Aluminium und Stahl*,  wt Werkstatttechnik online Jahrgang 108 (2018) H. 10

Behrens, B.-A.; Chugreev, A.; Matthias, T.; Nothdurft, S.; Hermsdorf, J.; Kaierle, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, J.; Hassel, T. (2018): Investigation of the composite strength of hybrid steel-steel semi-finished products manufactured by laser beam welding and friction welding,  IOP Conf. Series: Materials Science and Engineering 461 (2019) 012049
DOI: 10.1088/1757-899X/461/1/012049

Behrens, B.-A.; Chugreeva, A.; Mildebrath, M.; Diefenbach, J.; Barroi, A.; Lammers, M.; Hermsdorf, J.; Hassel, T.; Overmeyer, L. (2018): Manufacturing of High-Performance Bi-Metal Bevel Gears by Combined Deposition Welding and Forging,  Metals 2018, 8, 898
DOI: 10.3390/met8110898

Behrens, B.-A.; Klose, C.; Chugreev, A.; Thürer, S. E.; Uhe, J. (2018): Numerical Investigations on the Lateral Angular Co-Extrusion of Aluminium and Steel,  AIP Conference Proceedings 1960, 030001
DOI: http://dx.doi.org/10.1063/1.5034844

Bernd-Arno Behrens, Christian Klose, Alexander Chugreev, Norman Heimes, Susanne Elisabeth Thürer, Johanna Uhe (2018): A Numerical Study on Co-Extrusion to Produce Coaxial Aluminum-Steel Compounds with Longitudinal Weld Seams,  Metals, 8, 717

Blohm, T.; Nothdurft, S.; Mildebrath, M.; Ohrdes, H.; Richter, J.; Stonis, M.; Langner, J.; Springer, A.; Kaierle, S.; Hassel, T.; Wallaschek, J.; Overmeyer, L.; Behrens, B.-A. (2018): Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts,  International Journal of Material Forming 11 (6) 829-837

Denkena, B.; Bergmann, B.; Breidenstein, B.; Prasanthan, V.; Witt, M. (2018): Analysis of potentials to improve the machining of hybrid workpieces,  Production Engineering Research and Development, Published Online: 19th December 2018, 9 Seiten
DOI: 10.1007/s11740-018-00870-3

Denkena, B.; Bergmann, B.; Witt M. (2018): Investigations on a predictive process parameter adaptation for machining of hybrid workpieces,  CIRP Journal of Manufacturing Science and Technology
DOI: https://doi.org/10.1016/j.cirpj.2018.10.004

Denkena, B.; Bergmann, B.; Witt, M. (2018): Material identification based on machine-learning algorithms for hybrid workpieces during cylindrical operations,  Journal of Intelligent Manufacturing
DOI: https://doi.org/10.1007/s10845-018-1404-0

Denkena, B.; Bergmann; B.; Witt, M. (2018): Impact of hybrid workpieces on statistical process monitoring of machining operations,  The International Journal of Advanced Manufacturing Technology, 10.08.2018
DOI: https://doi.org/10.1007/s00170-018-2534-4

Denkena, B.; Breidenstein, B.; Grove, T.; Prasanthan, V.; Overmeyer, L.; Nothdurft, S.; Kaierle, S.; Wallaschek, J.; Twiefel, J.; Ohrdes, H.; Maier, H.J.; Hassel, T.; Mildebrath, M. (2018): Surface integrity of turned laser-welded hybrid shafts,  Production Engineering Research and Development, Published online: 04th December 2018, 9 Seiten
DOI: 10.1007/s11740-018-0862-8

Denkena, B.; Breidenstein, B.; Prasanthan, V. (2018): Influence of Tool Properties on the Thermomechanical Load during Turning of Hybrid Components and the Resulting Surface Properties,  HTM, Journal of Heat Treatment and Materials, Band 73, Ausgabe 4, S. 223-231

Herbst, S.; Maier, H. J.; Nürnberger, F. (2018): Strategies for the Heat Treatment of Steel-Aluminium Hybrid Components,  HTM Journal of Heat Treatment and Materials, 73(5)
DOI: 10.3139/105.110368

Nothdurft, S.; Springer, A.; Kaierle, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L. (2018): Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure,  Journal of Laser Applications, 30, 3, 032417-1 bis 032417-6

Siqueira, R.; Mozgova, I.; Lachmayer, R. (2018): An Interfacial Zone Evolutionary Optimization Method With Manufacturing Constraints For Hybrid Components,  Journal of Computational Design and Engineering
DOI: https://doi.org/10.1016/j.jcde.2018.10.003

Beermann, R.; Quentin, L.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): Background oriented schlieren measurement of the refractive index field of air induced by a hot, cylindrical measurement object,  Appl. Opt. 56 (14) Seitenzahl: pp. 4168-4179
DOI: 10.1364/AO.56.004168

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Bonhage, M.; Chugreeva, A.; Matthias, T. (2017): FE-based Design of a Forging Tool System for a Hybrid Bevel Gear,  Key Engineering Materials; ISSN: 1662-9795, Vol. 742, pp 544-551; doi:10.4028 / www.scientific.net/KEM.742.544

Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Matthias, T. (2017): Importance of material and friction characterisation for FE-aided process design of hybrid bevel gears,  AIP Conference Proceedings 1896, 190016 (2017)
DOI: 10.1063/1.5008229

Blohm, T.; Mildebrath, M.; Stonis, M.; Langner, J.; Hassel, T.; Behrens, B.-A. (2017): Investigation of the coating thickness of plasma-transferred arc deposition welded and cross wedge rolled hybrid parts,  Production Engineering Research and Development
DOI: 10.1007/s11740-017-0734-7

Breidenstein, B.; Denkena, B.; Mörke, T.; Prasanthan, V. (2017): Non-Destructive Determination of Residual Stress Depth Profiles of Hybrid Components by Energy Dispersive Residual Stress Measurement,  Key Engineering Materials, Vol. 742, S. 613-620
DOI: 10.4028/www.scientific.net/KEM.742.613

Denkena B.; Bergmann B.; Witt M. (2017): Automatic process parameter adaption for a hybrid workpiece during cylindrical operations,  The International Journal of Advanced Manufacturing Technology

Herbst, S.; Aengeneyndt, H.; Maier, H. J.; Nürnberger, F. (2017): Microstructure and Mechanical Properties of Friction Welded Steel-Aluminum Hybrid Components after T6 Heat Treatment,  Materials Science & Engineering: A, 696, S. 33-41
DOI: 10.1016/j.msea.2017.04.052

Herbst, S.; Dovletoglou, C. N.; Nürnberger, F. (2017): Method for Semi-Automated Measurement and Statistical Evaluation of Iron Aluminum Intermetallic Compound Layer Thickness and Morphology,  Metallography, Microstructure and Analysis, Jahrgang 6, Heft 5 Seiten: 367-374
DOI: 10.1007/s13632-017-0378-1

Mildebrath, M.; Somonov, V.; Nothdurft, S.; Ohrdes, H.; Springer, A.; Kaierle, S.; Hassel, T.:, Maier, H.-J.; Wallascheck, J. (2017): Influence of silicon on the structure and weldability of steel-aluminium joints processed by non-vacuum electron beam welding,  International Journal of Emerging Technology and Advanced Engineering, Volume 7, Issue 9, September 2017, p. 348-356

Mildebrath, M.; Blohm, T.; Hassel, T.; Stonis, M.; Langner, J.; Maier, H. J.; Behrens, B.-A. (2017): Influence of Cross Wedge Rolling on the Coating Quality of Plasma-Transferred Arc Deposition Welded Hybrid Steel Parts,  International Journal of Emerging Technology and Advanced Engineering

Barroi, A.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L. (2016): Influence of Scan Width and Wire Feed Speed on Seam Geometry and the Substrate Surface in Laser Wire Cladding,  Proceedings of Icaleo

Behrens, B.-A. Prof.; Bouguecha, A.; Vucetic, M.; Huskic, A.; Uhe, J.; Frischkorn, C.; Matthias, T.; Stakhieva, A.; Duran, D.; Thürer, S. E.; Golovko, O.; Klose, C. (2016): Umformtechnische Herstellung hybrider Lagerbuchsen,  wt Werkstattstechnik online, Jahrgang 106 (2016) H. 10

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Matthias, T.; Kolbasnikov, N.; Sokolov, S.; Ganin, S. (2016): Experimental investigations on the state of the friction-welded joint zone in steel hybrid components after process-relevant thermo-mechanical,  AIP Conf. Proc. 1769, 130013 (2016)
DOI: http://dx.doi.org/10.1063/1.4963532

Behrens, B.-A., Uhe, J., Petersen, T., Demter, P. Büdenbender, C., Ross, I. (2021): Joining zone evaluation of hybrid semi-finished products after backward can extrusion,  30th Anniversary International Conference on Metallurgy and Materials, Brno, Czech Republic, Mai 2021, S. 317-322
DOI: https://doi.org/10.37904/metal.2021.4106

Behrens, B.-A., Uhe, J., Süer, F., Duran, D., Matthias, T., Ross, I. (2021): Fabrication of steel-aluminium parts by impact extrusion,  Materials Today
DOI: https://doi.org/10.1016/j.matpr.2021.11.093

Behrens, B.-A., Uhe, J., Süer, F., Duran, D., Matthias, T., Ross, I. (2021): Fabrication of steel-aluminium parts by impact extrusion,  Materials Today: Proceedings

Behrens, B.-A.; Wester, H.; Petersen, T.; Uhe, J.; Büdenbender, C.; Peddinghaus, J.; Chugreevaa, A. (2021): Numerical evaluation of forging process designs of a hybrid co-extruded demonstrator consisting of steel and aluminium,  24th International Conference on Material Forming (ESAFORM 2021)
DOI: 10.25518/esaform21.954

Behrens, Bernd-Arno; Wester, Hendrik; Schäfer, Stefan, Büdenbender, Christoph (2021): Modelling of an induction heating process and resulting material distribution of a hybrid semi-finished product after impact extrusion,  24th International ESAFORM Conference on Material Forming – ESAFORM 2021, online, 2021
DOI: 10.25518/esaform21.574

Behrens, Bernd-Arno; Wester, Hendrik; Uhe, Johanna, Büdenbender, Christoph (2021): Numerical study on the influence of the initial temperature distribution on the material flow during die forging of a semi-finished aluminium-titanium product,  Congress of the German Academic Association for Production Technology (WGP), September 2021, Dresden, S. 122-130
DOI: 10.1007/978-3-030-78424-9_14

Grajczak, J.; Nowroth, C.; Twiefel, J.; Wallaschek, J.; Nothdurft, S.; Hermsdorf, J.; Wesling, V.; Kaierle, S. (2021): Investigations on the Weld Seam Geometry of Ultrasonic Assisted Laser Beam Welded Round Bars in and Beside Antinode Position,  Proceedings of LiM, 21.-24.06.2021 (online), Wissenschaftliche Gesellschaft Lasertechnik e.V. (WLT)

Herrmann, Kevin; Altun, Osman; Wolniak, Philipp ; Mozgova, Iryna; Lachmayer, Roland (2021): Methodischer Aufbau von Entwicklungsumgebungen nach dem Generative Parametric Design Approach,  Symposium Design for X (DFX2021), 27. und 28. September 2021, Tutzing, Germany
DOI: 10.35199/dfx2021.14

Herrmann, Kevin; Brockmöller, Tim; Gembarski, Paul Christoph ; Mozgova, Iryna; Lachmayer, Roland (2021): Fertigungsstufen-basiertes Gestaltungsmodell für mechanische Bauteile,  Stuttgarter Symposium für Produktentwicklung SSP 2021

Behrens, B. A.; Diefenbach, J.; Chugreeva, A.; Kahra, C.; Herbst, S.; Nürnberger, F. (2020): Tailored Forming of Hybrid Bevel Gears with Integrated Heat Treatment,  23rd International Conference on Material forming - ESAFORM 2020. online. 04.05.-08.05.2020, Procedia Manufactoring 47, 2020, S. 301-308
DOI: 10.1016/j.promfg.2020.04.234

Behrens, B.-A.; Heimes, N.; Klose, C.; Thürer, S.E; Uhe, J. (2020): Development of a Modified Tool System for Lateral Angular Co-Extrusion to Improve the Quality of Hybrid Profiles,  ESAFORM 2020. Procedia Manufacturing, Volume 47, 2020, Pages 224-230,
DOI: https://doi.org/10.1016/j.promfg.2020.04.200

Behrens, Bernd-Arno; Wester, Hendrik; Schäfer, Stefan; Büdenbender, Christoph (2020): Numerical Investigation of an Extruded Shaft for High Temperature Applications Manufactured by Tailored Forming,  Congress of the German Academic Association for Production Technology (WGP), September 2020, S. 182-192
DOI: 10.1007/978-3-662-62138-7_19

Brockmöller, Tim; Siqueira, Renan; Mozgova, Iryna; Lachmayer, Roland (2020): Operationalization of Manufacturing Restrictions for Tailored Forming Components,  Conference on Future Production of Hybrid Structures, 27–28th May 2020, Wolfsburg, Germany

Denkena, B.; Bergmann, B.; Handrup, M.; Witt, M. (2020): Material identification during turning by neural network,  Journal of Machine Engineering, Vol. 20, No. 2, S.65–76
DOI: 10.36897/jme/119677

Heimes, N.; Uhe, J.; Thürer, S.E.; Wester, H.; Maier, H.J:; Klose, C.; Behrens, B.-A. (2020): Numerical Development of a Tooling System for the Co-Extrusion of Asymmetric Compound Profiles on a Laboratory Scale,  Production at the leading edge of technology. WGP 2020. Lecture Notes in Production Engineering. Springer, Berlin, Heidelberg. pp 66-75
DOI: https://doi.org/10.1007/978-3-662-62138-7_7

Ince, C.-V.; Geggier, J.; Bruns, C.; Raatz, A. (2020): Development of a form-flexible handling technology with active cooling for hybrid components in forging processes,  8th CIRP Conference of Assembly Technology and Systems
DOI: https://doi.org/10.1016/j.procir.2020.05.200

Kloock-Schreiber, Daniel; Brockmöller, Tim; Schneider, Jannik; Gembarski, Paul Christoph; Mozgova, Iryna; Lachmayer, Roland (2020): TRIZ-Reverse for PSS potential determination,  9th International Conference on Mass Customizaon and Personalization – Community of Europe (MCP - CE 2020, September 23-25, 2020, Novi Sad, Serbia

Siqueira, Renan; Shugar, Sean; Mozgova, Iryna; Lachmayer, Roland (2019): Design of Hybrid Components Joining Zone through Sensitivity Analysis,  Proceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands, 5-8 August 2019
DOI: 10.1017/dsi.2019.276

Behrens, B.-A.; Goldstein, R., Chugreeva, A. (2018): Thermomechanical Processing for Creating Bi-Metal Bearing Bushings,  Thermal Processing in Motion 2018—Conference Proceedings of the Thermal Processing in Motion, June 5-7, 2018, Spartanburg, South Carolina, USA, pp. 15-21

Behrens, B.-A.; Goldstein, R.; Guisbert, D.; Duran, D. (2018): Thermomechanical Processing of Friction Welded Steel-Aluminum Billets to Improve Joining Zone Properties,  4th International Conference on Heat Treatment and Surface Engineering in Automotive Applications (Thermal Processing in Motion), 5.-7. Juni, Spartanburg, North Carolina, USA.

Nothdurft, S.; Ohrdes, H.; S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L.; Kaierle, S. (2018): Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloy,  International Congress on Applications of Lasers & Electro-Optics (ICALEO®), 14.-18.10.2018, Orlando

Siqueira, R.; Bibani, M.; Mozgova, I.; Lachmayer, R. (2018): Case-Based Parametric Analysis: A Method for Design of Tailored Forming Hybrid Material Component,  Proceedings of 39th International Conference on Information Systems Architecture and Technology – ISAT 2018, Springer
DOI: https://doi.org/10.1007/978-3-319-99996-8_2
ISBN: 978-3-319-99995-1

Baldrich, M.; Zeller, S.; Loehnert, S.; Wriggers, P. (2017): Modelling the thermoplastic material behaviour of a tailored formed joining zone on a microscopic length scale with focus on the steel component,  Proceedings in Applied Mathematics and Mechanics 17
DOI: 10.1002/pamm.201710165

Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Huskic, A.; Chugreeva, A. (2017): Process Routes for Die Forging of Hybrid Bevel Gears and Bearing Bushings,  ESAFORM 2017, 26.-28.04.2017, Dublin, Ireland

Behrens, B.-A.; Goldstein, R.; Duran, D. (2017): Role of Thermal Processing in Tailored Forming Technology for Manufacturing Multi-Material Components,  Heat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24-26, Columbus, Ohio, USA

Brockmöller, T.; Mozgova, I.; Lachmayer, R. (2017): An Approach to Analyse the Potential of Tailored Forming by TRIZ Reverse,  Proccedings of the 21st International Conference on Engineering Design (ICED 17) Vol 4: Design Methods and Tools, pp. 445-452, 21-25 August, Vancouver, Canada

Chugreeva, A.; Bouguecha, A.; Behrens, B.-A. (2017): Production Chain of Hot-Forged Hybrid Bevel Gears from Deposition-Welded Blanks,  7. WGP-Jahreskongress, 5.-6. Oktober 2017, Apprimus Verlag, Aachen, S. 21

Denkena B., Dahlmann D., Peters P., Witt M. (2017): Model based compensation of geometrical deviations due to process forces,  Conference on Supervising and Diagnostics of Machining Systems, Journal of Machine Engineering

Goldstein, R.; Behrens, B.-A.; Duran, D. (2017): Lightweighting by Tailored Forming: Bi-material Stepped Shaft,  Heat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24-26, Columbus, Ohio, USA

Herbst, S.; Nürnberger, F. (2017): Heat Treatment of Steel-Aluminum Hybrid Components,  Materials Science and Technology 2017. Pittsburgh, 08.-12.10.2017, S. 53-60

Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Overmeyer, L. (2017): Influence of beam position and ultrasonic amplitude on the micro-structure of laser welded dissimilar steel-steel joints,  International Congress on Applications of Lasers & Electro-Optics (ICALEO®) 22.-26.10.2017, Atlanta

Quentin, L.; Beermann, R.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): 3D Geometry Measurement of Hot Cylindric Specimen Using Structured Light,  SPIE Optical Metrology
DOI: 10.1117/12.2269607

Siqueira, R.; Lachmayer, R.; Mozgova, I. (2017): Development of a Topology Optimization Method for Tailored Forming Multi-Material Design,  COBEM 2017, 3-8 Dezember, Curitiba, Brazil

Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Behrens, B.-A.; Klose, C. (2017): Mechanical Properties of Co-Extruded Aluminium-Steel Compounds,  Key Engineering Materials Volume 742
ISBN: 10.4028/www.scientific.net/KEM.742.512

Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Klose, C.; Behrens, B.-A.; Maier, H. J. (2017): Co-Extrusion of Semi-Finished Aluminum-Steel Compounds,  AIP Conference Proceedings 1896, 140002
DOI: http://dx.doi.org/10.1063/1.5008158

Barroi, A.; Albertazzi Gonçalves, D.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L. (2016): Influence of Laser Power on the Shape of single Tracks in Scanner based Laser Wire Cladding,  9th International Conference on Photonic Technologies - LANE 2016

Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Chugreeva, A.; Duran, D. (2016): Angepasste Erwärmungs- und Umformverfahren für hybride Massivbauteile,  23. Sächsischen Fachtagung Umformtechnik (SFU) 2016, 7.-8. Dezember 2016, Dresden, Deutschland

Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Huskic, A.; Stakhieva, A.; Duran, D. (2016): Tailored Forming Technology for Three Dimensional Components: Approaches to Heating and Forming,  5th International Conference on Thermomechanical Processing, 26.-28. Oktober 2016, Mailand, Italien

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Matthias, T.; Kolbasnikov, N.; Sokolov, S.; Ganin, S. (2016): Experimental investigations on the state of the friction-welded joint zone in steel hybrid components after process-relevant thermo-mechanical,  19th annual Conference on Material Forming ESAFORM2016, Mini-Symposium “Rolling and Forging”, 27-29 April 2016, Nantes, France

Breidenstein, B.; Denkena, B.; Prasanthan, V. (2016): Energy dispersive residual stress determination,  Euro Hybrid- Materials and Structures
ISBN: 978-3-88355-414-3

Gembarski, P.C.; Bibani, M.; Lachmayer, R. (2016): Design Catalogues: Knowledge Repositories for Knowledge-Based-Engineering,  14th International Design Conference, 16.-19. May 2016, Cavtat, Dubrovnik, Croatia

Gembarski, P.C.; Sauthoff, B.; Brockmöller, T.; Lachmayer, R. (2016): Operationalization of Manufacturing Restrictions for CAD and KBE-Systems,  14th International Design Conference, 16.-19. May 2016, Cavtat, Dubrovnik, Croatia

Böhm, C.; Hudobivnik, B.; Aldakheel, F.; Wriggers, P. (2021): Virtual Element Method for finite strain crystal plasticity,  Conference: 14th WCCM-ECCOMAS Congress, Minisymposium 378
DOI: 10.113140/RG.2.2.25397.50401

Böhm, C.; Hudobivnik, B.; Marino, M.; Wriggers, P. (2021): Multiphysics response of polycrystalline materials: Computational homogenization via the Virtual Element Method,  Conference: Polygonal methods for PDEs: theory and applications

Breidenstein, B.; Prasanthan, V. (2018): Analyse der Oberflächen- und Randzoneneigenschaften von US-laserstrahlgeschweißten Verbundwellen,  Arbeitstreffen „Energiedispersive Röntgenbeugung“, 22. November 2018, Kassel, 23 Seiten

Siqueira, R.; Bibani, M.; Mozgova, I.; Lachmayer, R. (2018): A Case-based Reasoning Approach for Design of Tailored Forming Hybrid Material Component,  Proceedings of 41st Solid Mechanics Conference, August 27-31, Warsaw, Poland, http://solmech2018.ippt.pan.pl/

Siqueira, R.; Mozgova, I.; Lachmayer, R. (2018): A Multi-material Optimization Method with Manufacturing Constraints for Tailored Forming,  Proceedings of 41st Solid Mechanics Conference, August 27-31, Warsaw, Poland, http://solmech2018.ippt.pan.pl/

Breidenstein, B.; Denkena, B.; Prasanthan, V. (2017): Energy dispersive residual stress determination,  21. Symposium Verbundwerkstoffe und Werkstoffverbunde, 05.-07.07.2017, Bremen, 23 Seiten

Brockmöller, T.; Mozgova, I.; Lachmayer, R. (2017): Gestaltung und Dimensionierung,  Umformungstechnisches Kolloquium, Hannover, Germany

Breidenstein, B.; Denkena, B.; Prasanthan, V. (2016): Energy dispersive residual stress determination,  Euro Hybrid- Materials and Structures

Breidenstein, B.; Prasanthan, V. (2016): Funktionsangepasste Prozessplanung der spanenden Bearbeitung hybrider Bauteile,  Arbeitstreffen „Energiedispersive Röntgenbeugung“, 17.03.2016, Berlin, 27 Seiten

Drafz, R.; Neubauer, T., Pape,F., Poll, G. (2016): Rolling contact fatigue lifetime model for combined matrials including residual stresses,  10th International Conference on Residual Stresses, Sydney, Australia

Kruse, J.; Mildebrath, M.; Budde, L.; Coors, T.; Faqiri, M.Y.; Barroi, A.; Stonis, M.; Hassel, T.; Pape, F.; Lammers, M.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L.; Poll, G. (2020): Numerical Simulation and Experimental Validation of the Cladding Material Distribution of Hybrid Semi-Finished Products Produced by Deposition Welding and Cross-Wedge Rolling,  Metals
DOI: https://www.mdpi.com/2075-4701/10/10/1336

Nothdurft, S.; Ohrdes, H.; S.; Ohrdes, H.; Twiefel, J.; Wallaschek, Overmeyer, L.; Kaierle, S. (2020): Investigations on the effect of different ultrasonic amplitudes and positions in the vibration distribution on the microstructure of laser beam welded stainless steel,  Proc. SPIE 11273, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems IX
DOI: 10.1117/12.2566035

Nothdurft, S.; Seffer, O.; Lahdo, R.; Hermsdorf, J.; Kaierle, S. (2018): Laser beam joining of dissimilar joints of steel and aluminium alloys,  Welding and Cutting, Jhg. 17, Heft 5

Blohm, T.; Langner, J.; Stonis, M.; Behrens, B.-A. (2017): Basic study of incremental forming of serially arranged hybrid parts using cross-wedge rolling,  International Journal of Emerging Technology and Advanced Engineering. ISSN 2250-2459, ISO 9001:2008 Certified Journal, vol. 7 (2017) no. 7, pp. 1-7.

Blohm, T.; Nothdurft, S.; Mildebrath, M.; Ohrdes, H.; Richter, J.; Stonis, M.; Langner, J.; Springer, A.; Kaierle, S.; Hassel, T.; Wallaschek, J.; Overmeyer, L.; Behrens, B.-A (2017): Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts,  International Journal of Material Forming, Springer-Verlag France (2017)
DOI: 10.1007/s12289-017-1393-0

Maier, H. J. (2017): Der richtige Werkstoff an der richtigen Stelle,  Jahresmagazin Werkstofftechnik 2017, S. 100-107, http://www.alphapublic.de/flashbook/096-487_Ing_Werkstoff_17/files/assets/common/downloads/096-487_Ing_Werkstoff_17.pdf

Nothdurft, S.; Seffer, O.; Pfeifer, R.; Springer, A.; Kaierle, S. (2017): Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen,  Schweißen und Schneiden 69 (2017) 9 600-607

Denkena, B.; Dahlmann, D.; Brühne, B.; Witt M. (2016): Prozessbegleitende Werkstoffübergangsdetetektion,  ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 07-08/2016, Seite 407-410

Behrens, B.-A.; Huskic, A.; Frischkorn, C.; Duran, D. (2015): Fließpressen hybrider Halbzeuge,  veröffentlicht in wt Werkstattstechnik online, Ausgabe 10-2015 S. 704-708, Springer-VDI-Verlag, Düsseldorf

Blohm, T. (2015): Querkeilwalzen bringt hybride Halbzeuge in Form,  Phi - Produktionstechnik Hannover informiert, PZH-Verlag, 18. Jg. (2015), ISSN 2198-1922

Hassel, T.; Nothdurft, S.; Saalbach; K.-A. (2015): Laserschweißen verbindet unterschiedliche Materialien,  Phi - Produktionstechnik Hannover informiert

Hockauf, R. (2015): Eigenspannung macht Hybride-Bauteile haltbarer,  Phi – Produktionstechnik Hannover informiert, 3/2015, 3 S.

Matthias, T.; Peshekhodov, I. (2015): Numerische Simulation sagt Fügezonen-Versagen vorher,  phi – Produktionstechnik Hannover informiert, Ausgabe 3/2015, Garbsen

Thürer, S. E. (2020): Prozessentwicklung für das Verbundstrangpressen hybrider Hohlprofile aus Aluminium und Stahl,  Dissertation, Berichte aus dem IW 01/2020, Garbsen: TEWISS Verlag
ISBN: ISBN: 978-3-95900-484-8

Herbst, S. (2018): Inverse Prozessauslegung der prozessintegrierten Wärmebehandlung von Großschmiedebauteilen mittels Luft-Wasser-Spraykühlung,  Dissertation, Berichte aus dem IW 05/2018, Garbsen: TEWISS Verlag ISBN: 978-3-95900-237-0

Barroi, Alexander; Biester, Kai; Budde, Laura; Lammers, Marius; Hermsdorf, Jörg; Overmeyer, Ludger (2021): Height variation in scanned hot-wire laser surfacing processes,  Proceedings of LiM 2021, Wissenschaftliche Gesellschaft Lasertechnik e.V.

Budde, Laura; Lammers, Marius; Hermsdorf, Jörg; Kaierle, Stefan; Overmeyer, Ludger (2021): Process development for laser hot-wire deposition welding with high-carbon material AISI52100,  Proceedings of LiM 2021, Wissenschaftliche Gesellschaft Lasertechnik e.V.

Büdenbender C., Ross I., Wester H., Zaitsev A., Behrens B.A. (2021): Numerical Investigation of an Extruded Shaft for High Temperature Applications Manufactured by Tailored Forming,  Production at the leading edge of technology. WGP 2020. Lecture Notes in Production Engineering. Springer, Berlin, Heidelberg
DOI: 10.1007/978-3-662-62138-7_19

Behrens, B.-A.; Diefenbach, J.; Ross, I. (2020): Optimierung des Werkstoffverbunds hybrider Stahl – Aluminium Bauteile beim Fließpressen und Reibschweißen,  Tagungsband des 23. Umformtechnisches Kolloquium Hannover, Garbsen, 04. März 2020, TEWISS-Verlag
ISBN: 978-3-95900-423-7

Breidenstein, B.; Denkena, B.; Prasanthan, V. (2020): Einfluss von Randzoneneigenschaften auf die Strukturfestigkeit hybrider Bauteile,  Tagungsband zum 23. Umformtechnisches Kolloquium Hannover, 04.-05.03.2020, Hannover
ISBN: ISBN 978-3-95900-423-7

Kahra, C.; Herbst, S.; Nürnberger F. (2020): Wärmebehandlung für belastungsangepasste Werkstoffeigenschaften von Tailored-Forming-Komponenten,  Tagungsband des 23. Umformtechnisches Kolloquium Hannover

Nowroth, C.; Grajczak, J.; Nothdurft, S.; Hermsdorf, J.; Twiefel, J.; Kaierle, S.; Wallaschek, J. (2020): Introducing the concept of self-sensing for ultrasonic assisted laser beam welding of 1.4301 stainless steel and 2.4856 nickel alloy,  The 17th International Workshop on Piezoelectric Materials and Applications in Actuators

Nowroth, C.; Nothdurft, S.; Hermsdorf, J.; Kaierle, S.; Twiefel, J.; Wallaschek, J. (2020): Detektion und Interpretation von Schwingungen beim Laserstrahlschweißen unter Einsatz eines optischen Mikrofons,  22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik

Behrens, B.-A.; Klose, C.; Thürer, S.; Heimes, N.; Uhe, J. (2019): Herstellung koaxialer Verbundprofile mittels Lateral Angular Co-Extrusion,  Behrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020, Posterbeitrag, TEWISS, Garbsen, 2020

Behrens, B.-A.; Klose, C.; Thürer, S.; Heimes, N.; Uhe, J. (2019): Numerical modeling of the development of intermetallic layers between aluminium and steel during co-extrusion,  Lander Galdos, L. et al. (Hrsg.): Proceedings of the 22nd international ESAFORM conference on material forming: ESAFORM 2019. Vitoria-Gasteiz, Spanien. 08.05. – 10.05.2019, S. 40029
DOI: https://doi.org/10.1063/1.5112563

Behrens, B.-A.; Sokolinskaja, V.; Chugreeva, A.; Diefenbach, J.; Thürer, S.; Bohr, D (2019): Investigation into the bond strength of the joining zone of compound forged hybrid aluminium-steel bearing bushing,  Lander Galdos, L. et al. (Hrsg.): Proceedings of the 22nd international ESAFORM conference on material forming: ESAFORM 2019. Vitoria-Gasteiz, Spanien. 08.05. – 10.05.2019, S. 40028
DOI: https://doi.org/10.1063/1.5112562

Pape, F.; Coors, T.; Chugreev, A.; Matthias, T.; Uhe, J.; Thürer, S.; Klose, C.; Behrens, B.-A. (2019): Ultrasonic evaluation of tailored forming bearing components,  12th International Symposium on Rolling Bearing Steels – Progress in Bearing Steel Metallurgical Testing and Quality Assurance. Denver. 15.05.-17.05.2019
DOI: https://doi.org/10.13140/RG.2.2.28034.53443

Beermann, R.; Quentin, L.; Reithmeier, E.; Kästner, M. (2018) (2018): 2D refractive index field measurements in air in different pressure scenarios,  Proceedings of SPIE 10819, SPIE Photonics 11. – 13. October 2018, Beijing, China Seitenzahl: pp. 108190E-1 - 108190E-8
DOI: 10.1117/12.2500315

Herbst, S.; Nürnberger, F. (2018): Characterization of Heat Transfer in Complex Air-Water Spray Quenching Set-Ups,  International Conference on Quenching and Distortion Engineering (QDE), 27.-29. November 2018, Nagoya, Japan

Quentin, L.; Beermann, R.; Pösch, A.; Reithmeier, E.; Kästner, M. (2018): Enhanced measurement routine for optical 3D geometry measurement of hot specimen by reduction of ambient pressure,  Engineering for a Changing World: Proceedings; 59th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, September 11-15, 2017, vol. 59, no. 1. Zitierlink: https://nbn-resolving.org/urn:nbn:de:gbv:ilm1-2017iwk-065:1

Beermann, R.; Quentin, L.; Kästner, M.; Pösch, A.; Reithmeier E. (2017): Simulation of Light Deflection Due to an Inhomogeneous Refractive Index Field Induced by a Hot Measurement Object,  Proceedings of the 118th Annual Meeting of DGaO, DGaO 06. - 10. Juni 2017, Dresden, Deutschland, Link zur PDF: https://www.dgao-proceedings.de/download/118/118_a20.pdf, ISSN: 1614-8436

Beermann, R.; Quentin, L.; Kästner, M.; Pösch, A.; Reithmeier, E. (2017): Brechungsindexbestimmung zur Umsetzung hochgenauer 3D-Messungen an warmen Tailored Forming Bauteilen,  Innovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15.-16. März 2017, PZH Verlag, Garbsen.

Beermann, R.; Quentin, L.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): Light Section Measurement to Quantify the Accuracy Loss Induced by Laser Light Deflection in an Inhomogeneous Refractive Index Field,  In: Proceedings of SPIE 10329, SPIE Optical Metrology 25. - 29. June 2017, Munich, Germany Seitenzahl: pp. 103292T-1-103292T-7
DOI: 10.1117/12.2269724

Behrens B.-A.; Bouguecha, A.; Bonk, B.; Matthias, T. (2017): Experimentell-numerische Methode zur Vorhersage der Schädigung und des Versagens von Fügezonen in Hybridhalbzeugen während der Umformung,  Innovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15.-16. März 2017, PZH Verlag, Garbsen, S. 201

Behrens, B.-A.; Bouguecha, A.; Moritz, J.; Bonk, C.; Stonis, M.; Klose, C.; Blohm, T.; Chugreeva, A.; Duran, D.; Matthias, T.; Golovko, O.; Thürer, S. E.; Uhe, J. (2017): Aktuelle Forschungsschwerpunkte in der Massivumformung,  22. Umformtechnisches Kolloquium Hannover, 15.-16.03.2017

Blohm, T.; Stonis, M. Behrens, B.-A. (2017): Inkrementelle Umformung hybrider Halbzeuge mittels Querkeilwalzen,  22. Umformtechnisches Kolloquium Hannover (2017), Konferenzband

Breidenstein, B.; Denkena, B.; Prasanthan, P. (2017): Funktionsangepasste Prozessplanung,  22. Umformtechnisches Kolloquium Hannover

Brockmöller, T.; Gembarski, P.C.; Mozgova, I.; Lachmayer, R. (2017): Design Catalogue in a CAE Environment for the Illustration of Tailored Forming,  59th Ilmenau Scientific Colloquium, 11-15 September, Ilmenau

Chugreeva, A.; Behrens, B.-A. (2017): Gesenkschmieden koaxial angeordneter Hybridhalbzeuge,  Innovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15.–16. März 2017, PZH Verlag, Garbsen S. 207

Duran, D.; Behrens, B.-A. (2017): Fließpressen seriell angeordneter Hybridhalbzeuge,  Behrens, B.-A. (Hrsg.), Innovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15. – 16. März 2017, PZH Verlag, Garbsen, S. 198

Herbst, S.; Nürnberger, F. (2017): Wärmebehandlung für belastungsangepasste Werkstoffeigenschaften von Tailored Forming-Komponenten,  Innovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15. – 16. März 2017, PZH Verlag, Garbsen, S. 193

Herbst, S.; Nürnberger, F. (2017): Heat Treatment of Steel-Aluminium Tailored Forming-Components,  Metal Forming department. National Metallurgical Academy of Ukraine (Hg.): XI International Scientific and Technical Conference "Plastic Deformation of Metals", 22-26 May 2017, S. 48-49, Book of Abstracts: http://www.metal-forming.org/images/annot-2017/program-2017-omd.pdf

Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Hassel, T.; Maier, H. J.; Ohrdes, H.; Wallaschek, J.; Overmeyer, L. (2017): Fügezonenbeeinflussung beim Laserstrahlschweiẞen von Stahl-Aluminium Mischverbindungen zur Verbesserung der Umformeigenschaften,  Innovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15.-16. März 2017, PZH Verlag, Garbsen

Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Hassel, T.; Ohrdes, H.; Wallaschek, J. (2017): Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahl-schweißprozess durch Ultraschall,  Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering, Band 4, Tagungsband 2. Niedersächsisches Symposium Materialtechnik 23. bis 24. Februar 2017. Shaker, Aachen S. 259-268

Pape, F.; Coors, T.; Barroi, A.; Hermsdorf, J.; Mildebrath, M.; Hassel, T.; Kaierle, S.; Matthias, T.; Bonk, C.; Chugreeva, A.; Bonhage, M.; Bouguecha, A.; Behrens, B.-A.; Overmeyer L.; Poll, G. (2017): Tribological Investigations on Tailored Formed Axial Bearing Washers,  6th World Tribology Congress, 17th – 22th September 2017, Beijing, China

Quentin, L.; Beermann, R.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): 3d Geometry Measurement of Hot Specimens in Rough Vacuum,  In: Proceedings of SPIE 10329, SPIE Optical Metrology 25. – 29. June 2017, Munich, Germany Seitenzahl: pp. 103290U-1-103290U-6.

Thürer, S. E.; Golovko, O.; Bonk, C.; Behrens, B.-A.; Bouguecha, A.; Klose, C.; Uhe, J. (2017): Einfluss der lokalen Mikrostruktur auf die Umformbarkeit stranggepresster Werkstoffverbunde,  22. Umformtechnisches Kolloquium Hannover, 15.-16.03.2017

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.;Peshekhodov, I; Matthias, T. (2016): Experimentelle Untersuchungen der Fügezone hybrider Massivbauteile unter prozessähnlichen Beanspruchungen

Drafz, R.; Poll, G. (2016): Ermüdungslebensdauermodell für kombiniert strukturmechanische und wälzbeanspruchte hybride Bauteilzonen,  2. Internationale Konferenz Euro Hybrid, Kaiserslautern, Germany

Nothdurft, S.; Lahdo, R.; Seffer, O.; Springer; A., Kaierle, S. (2016): High power laser welding for several applications,  OSA Laser Congress (Laser Applications Conference), 30.10.-03.11.2016, Boston

Ohrdes, H.; Fischer, H.; Twiefel, J.; Wallaschek, J. (2016): Experimental investigation of ultrasonic fluid mixing as assistance for a laser welding process,  International Conference on Noise and Vibration Engineering, Leuven (Belgium), 19-21. September 2015, Proceedings of ISMA 2016, pp. 1595-1603

Beermann, R.; Müller, T.; Reithmeier, E. (2018): Optisches Messsystem,  Patentnummer: DE 10 2017 101 446 A1 Anmeldetag: 25.01.2017 Offenlegungstag: 26.07.2018 Veröffentlichungstag der Patenterteilung: noch nicht erteilt

Nothdurft, S.; Springer, A.; Kaierle, S (2018): Influencing the weld pool during laser welding.,  Lawrence, J. (Editor): Advances in Laser Materials Processing Technology: Research and Applications 2nd Edition (235-256)
DOI: https://doi.org/10.1016/B978-0-08-101252-9.00010-8